博物館展柜是博物館重要的展示工具之一，大部分文物都需要利用各式各樣的展柜經行承裝展覽。那么博物館展柜在設計的時候尺寸方面的把我有哪些技巧呢？
1，在設計之初出，博物館的數據可以通過3d測量儀來測量大體的數據，雖然設計數據精準度不是那么高但是好處是設計的效率比較高，可以快速的獲得。然后設計效果圖。
2，對于展柜設計的數據我們就要在測量儀的技術上進行人工測量和校對。因為這時候的數據準確些至關重要，一點的差錯都可能造成安裝時候無法安裝的嚴重后果。
3，展柜的尺寸設計的時候建議預留0.5-1cm的空間用于以后安裝時候的微調，一般展柜尺寸設計遵循“宜大不宜小”的原則。如果有曉得縫隙可以通過工程膠經行填充，不影響美觀，也可以對展柜固定起到輔助作用。但是如果展柜稍大可能就造成無法安裝的后果，后期調整起來非常困難。
4，對于鈑金的設計我們的是“宜大不宜小”因為鈑金在焊接過程中可以通過折彎，打磨等方式經行縮減和調整。金屬的延展性和可塑性為展柜設計提供改良空間。
5，還有一個小技巧可以和大家分享一下。如果展柜安裝好玻璃后整體無法平衡如果傾斜度不是很大那么可以先不用調整后期通過滾輪的角度調節實現平衡。這樣的方法可以很好的彌補鈑金和柜體本身的不平整性。
所以博物館在設計展柜的時候可以利用尺寸的優化獲得更加的整體效果。
Museum display case is one of the most important exhibition tools in museum. Most cultural relics need to be mounted and displayed by using various display case. So what are my skills in terms of size when designing a museum display case? Let's talk about it today. 1. At the beginning of the design, the museum's data can be measured by a 3D measuring instrument. The design data is not as accurate but the advantage is that the design is efficient and can be obtained quickly. And then you design the renderings. 2, for the display case design data we have to measure and proofread manually in the measuring instrument technology. Because the data is more accurate at this time is crucial, a little error may cause the serious consequence that installs when unable to install. 3, when the cabinet size design, we suggest to reserve 0.5-1cm space for later installation of fine-tuning, general cabinet size design to follow the "appropriate big not small" principle. If you know that the gap can be filled through the engineering glue, does not affect the aesthetic, can also play an auxiliary role in the cabinet fixed. However, if the cabinet is slightly larger may not cause the consequences of installation, post-adjustment is very difficult. 4, for the design of the sheetmetal we are "should not be small" because the sheetmetal in the welding process can be through bending, grinding and other ways to reduce and adjust. The malleability and plasticity of metals provide room for improvement in display case design. 5. Here's another tip to share. If the display case installed glass after the overall balance if the tilt is not very large then you can first do not need to adjust the later through the angle of the roller to achieve balance. This method can make up the unevenness of the sheet metal and the cabinet body. So when designing the exhibition cabinet, the museum can use the size optimization to get a more overall effect. I hope that the vast number of museum display case manufacturers in the production process we share more exchanges. Let the industry get more valuable experience!